Safety Glass Fire Use & Care Manual
ATTENTION
The Glass Fire should be used only as specified in the instructions.
LIGHTING THE FIRE
1. Arrange all Glass Fire elements by referring to the assembly instruction.
2. Make sure that stones are not placed directly on top of the fuel reservoir.
3. Remove the fuel pot from the tray and fill it with Biofuel.
4. Put the fuel pot back into the tray's centre hole.
When putting the fuel pot back in place, take care to avoid spilling the fuel. If the fuel is spilt, wipe it up or wait until it dries off. Do not light the spilled fuel as the glass cylinder may crack.
5. Always light the fire using the special safety lighter supplied.
FOR YOUR SAFETY :
1. USE ONLY BIOFUEL. NEVER USE WOOD OR OTHER FUELS AS
THE GLASS FIRE COULD BE DAMAGED.
2. The area surrounding the Glass Fire should be kept clear of flammable or heat sensitive items.
3. There should be a gap of at least 100cm between the top of the fire and any combustible surface.
4. The fuel should be burnt completely.
5. DO NOT REFILL THE FUEL WHILE IT IS STILL BURNING .
6. Glass cylinder should remain fitted while the Glass Fire is in use to avoid accidental contact with open fire.
7. Do not move the Glass Fire while it is in use.
8. Do not leave the Glass Fire burning unattended.
ATTENTION !!!
KEEP THE BURNING GLASS FIRE AND THE FUEL OUT OF REACH OF CHILDREN AND PETS .
|
